Any Questions? Call Us: 0086-731-86880480
NewsCurrent Position : Home > News > Plastic spraying technology features

Plastic spraying technology features

Author: langfeng Time: 2017-12-04

Hunan WISE New Material Technology Co.,Ltd.

Plastic spraying technology features

Plastic spraying and other spray technology and other spray process, compared with the following characteristics;
1, simple equipment does not require large-scale equipment and special machines, ovens and so on.
2, the process is simple, easy to grasp Plastic flame spraying process is simple, low process continuity requirements, process parameters, operators only need a short training, you can master, after several tests, can develop a reasonable process specification.
3, the source of material rich plastic flame spraying material is the main material, other necessary auxiliary material is not much, in some cases, you can use plastic material instead of precious metals, such as copper, chromium, nickel and so on.
4, high production efficiency Plastic spraying production efficiency ten times higher than the plating ten times, and generally do not need to be sprayed before the car, grinding and other mechanical processing, thus shortening the processing time.
5, the thermal effects of the workpiece Small plastic spraying temperature of the workpiece is generally 130--250 `C or so, in this temperature range, the workpiece heat treatment properties generally do not change. In addition, compared with surfacing, the impact of plastic spraying on the workpiece is small, can effectively prevent the workpiece thermal deformation. The small work-pieces in the surfacing, but often prone to deformation.
6, a wide range of applications Wide use of plastic spraying can be in the steel, cast iron, copper or aluminum and other metal workpiece surface, the thickness of 0.1-0.5 mm coating can be used for dynamic fit, static fit or seal and leakproof, anti-corrosion effect The occasion
7, excellent performance of the spray coating The impact strength, shear strength, toughness, fatigue resistance of repeated deformation of the plastic spray coating are better than the epoxy adhesive. Plastic coating corrosion resistance is good, the general metal can not match. It also has good sound absorption, thermal insulation and electrical insulation properties, can be used in a variety of special requirements of the occasion. Plastic spray coating has excellent machinability, can carry out various forms of machining.
Spraying plastic spray finish up to spend 8, when the smooth finish up to spend 12 flowers. Therefore, the size and geometry of the workpiece are easy to guarantee. In addition, if various modified materials are added to the plastic sprayed coating, the physical and mechanical properties of one aspect of the sprayed coating, such as increasing the strength, increasing the wear resistance, increasing the thermal conductivity and the like, are remarkably improved.
8, low cost The cost of plastic coating is about 1 / 6-1 / 8 of the metal coating; vibration welding 1 / 3-1 / 5; chrome one-tenth to one-twentieth.
9, operating conditions Plastic spraying generally does not produce carbon monoxide, ozone and acid and other harmful gases, it will not produce arc, ultraviolet rays and other harmful rays. Therefore, it will not pollute the environment and endanger the operators.
Plastic spraying also has some disadvantages. The main disadvantage is the hardness of spray coating, lower strength, poor heat resistance and thermal conductivity. For general nylon, the maximum operating temperature of plastic spray coating is only 100-150 degrees.
For more information please link:,please contact us:


Online Message
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.
Your Name:
* Your E-mail:
* Message: